1, Power on HO, 
choose probe Leeb or UCI-HP, 
batch model on/off, 
auto save choose on, 
bluetooth/USB choose USB
set On line operation ON

2, Connect main unit and computer by USB cable

3, Open your computer to Device Management, find the com number for CH-340, 
for example COM16, If no COM number, means your did not install well CH-340, please install it. 

4, open software, click Setting, choose corresponding COM number, for example 
COM16, then set report head, then click OK, finally click OPEN on top left of software interface.

4.1, if can not open software, please execute file vcredist_x86(sp1). 

5, click New on lower left quarter of software, set (BATCH/AVERAGE) and (UCI/LEEB), 
keep the setting is same with main unit, and limitation. 

6, under Batch mode, click REAL TIME DISPLAY, means once got a result, software will 
auto generate histogram, otherwise, click ADD once all the measurement was done. 

7, under AVERAGE mode, histogram will be displayed once finished a group of measurement, 
same click REAL TIME DISPLAY, otherwise you need to click ADD. 

8, when click Report, to save Excel format report. 

9, Click Save, means save the data and histogram, file format is hdb, once can be opened by this software. 


